Removing The Keyboard - NEC Versa E3100 Disassembly Manual

Removing the Keyboard

To remove the Keyboard, first remove the battery (see Removing the Battery), then perform
the following steps:
1. Unscrew the keyboard cover from the rear of the system as shown in Fig. 9
2. Lift up the keyboard cover carefully as shown in Fig. 10
3. Unscrew the two keyboard screws as shown in Fig. 11
Fig. 9 Releasing the keyboard cover
Fig. 10 Lifting up the Keyboard Cover
Fig. 11 Unscrewing the two screws on the keyboard
NEC VERSA E3100 Disassembly Manual
M2.5X4.5 Black
M2X4 Silver
Page 11