Removing The Keyboard Cover; Removing The Keyboard - NEC Versa P520 Disassembly Manual

Removing the Keyboard Cover

1. Carefully insert a flat screwdriver in the positions as shown in the picture, release the
keyboard cover and put it aside.

Removing the Keyboard

1. Remove the keyboard
2. Carefully lift up the keyboard and put it face down on the front of the notebook taking
care not to rip off the keyboard flat cable.
3. Locate the connector on the main board where the keyboard cable is connected.
Fig. 7: Removing the keyboard cover
cover.
Fig. 8: Lifting up the keyboard
NEC Versa P520 Disassembly Manual Page 8