tle,
The 16-slot power supply board communicates with the
rest of the system via jacks 17 and 35 to the backpanel.
Tables 9.3 through 9.5 list each signal either generated or
Signal
Jack | Source | Destination | Description
Pin
*
GND
J17
Power
Backpanel
Power or logic
Even
Supply
ground
J35 Pins
Pins
Supply
33-36
Supply
if battery
configured
J35-28
Supply
-5 MEM-P**
J35-19
Power
Backpanel
Same as -5V if
Supply
battery backup
not configured
-11V
J35-25
Power
Backpanel
EIA Interface
Pin
*
Supply
margining
logic. * *
MEM
Supply
Voltage OK
Supply
voltages OK
Supply
off or DC power
Supply
voltages OK
Supply
+5V, +5
Backpanel | Power Supply
MEM, + 12V,
Signal
Jack | Source | Destination | Description
B40CLK
J35-10
Power
Backpanel
40 MHZ Square
Supply
wave
Supply
Train
LCLK
J35-17
| Power
Backpanel
50/60 HZ
PSCLK * *
J35-5
Backpanel
|Power Supply | Strobes data
margining lagic
the backpanel.
+5 MEM-P voltage cannot be margined when battery backup is
configured.)
Need help?
Do you have a question about the NOVA 4/S and is the answer not in the manual?