Data General NOVA 4/S Manual page 64

Data General Corporation (DGC) has prepared this manual for use by DGC personnel and customers as a guide to the proper installation, operation, and
maintenance of DGC equipment and software. The drawings and specifications contained herein are the property of DGC and shall neither be reproduced in whole or
in part without DGC's prior written approval nor be implied to grant any license to make, use, or sell equipment manufactured in accordance herewith.
NOVA 4 EXERCISER
SAMPLE PROGRAM RUN SUMMARY
(No Errors Found; DTOS Auto Mode)
DTOS Mnemonic:
DTOS Directory:
DTOS Command:
Special Machine Requirements:
Estimated Program Run Times:
None
SELECT OR CSELECT
Listing No. 096-001 136
Operator Input:
*SELECT N4EXER
Program Output:
ACTIVE DIRECTORY=HOST
PROCESSOR UNDER TEST=HOST
N4EXER REV. 01
N4EXER 01 RUNNING
MMU PRESENT
TOTAL # OF 1K'S=64
PASS 1
PASS 2
PASS 3
Operator Input:
*CSELECT N4EXER
Program Output:
INPUT DATA CHANNEL EXERCISER TO BE RUN
(O = STANDARD DISK, 1 = ZEBRA DISK,
2 = I/O TESTER)
<ENTER APPROPRIATE NUMBER -
O, 1, 2, - FOLLOWED BY CARRIAGE RETURN>
N4EXER REV.
Program Output:
IS THIS A 4231 OR 6070 TYPE DISK?
(O = NO, 1 = YES)
<<ENTER APPROPRIATE NUMBER - O
Program Output:
ENTER DISK DEVICE CODE
<ENTER APPROPRIATE NUMBER -
Comments
Note 2
Notes
1. MMU PRESENT is printed when program is run on NOVA 4/X
2. TOTAL # 1K'S varies with system.
Note 4 3. ZEBRA DISK means DGC model 6060,6061 or 6067 disc drive.
4. Answer "'yes'' if the disc is either a 4231 or a 6070.
5. The remaining program output is the same as that generated when
the program is run using the SELECT command, except that the
program outputs an ''S" at the beginning of the first pass and five
"P''s and an ''S"' during the passes as shown below. Approximately
1 minute elapses between ''P''s.
S
PASS 1 PPPPPS
PASS 2 PPPPPS
PASS 3 PPPPPS
*