Data General NOVA 4/S Manual page 62

Data General Corporation (DGC) has prepared this manual for use by DGC personnel and customers as a guide to the proper installation, operation, and
maintenance of DGC equipment and soft ware. The drawings and specifications contained herein are the property of DGC and shall neither be reproduced in whole or
in part without DGC's prior 'vritten approval nor be implied to grant any license to make, use, or sell equipment manufactured in accordance herewith.
NOVA 4 MEMORY DIAGNOSTIC, MAPPED
SAMPLE PROGRAM RUN SUMMARY
(Errors Found; DTOS Auto Mode)
DTOS Mnemonic: N4MDM
DTOS Directory: HOST
DTOS Command: SELECT
NOVA 4/X CPU
Listing No. 096-001132
Special Machine Requirements:
Operator Input: Comments
*SELECT N4MDM
Program Output:
ACTIVE DIRECTORY=HOST
PROCESSOR UNDER TEST=HOST
N4MDM REV. OO < Date >
**PROGRAM EXEC**
TEST NAME: MODIFIED DATA=ADDORESS
TEST NAME: DATA=ADDRESS UPPER
TEST NAME: STUCK ADDRESS BIT
TEST NAME: MARCHING 1-O
TEST NAME: GALLOPING COLUMNS
***ERROR ENCOUNTERED
TEST NAME:
BOARD NUMBER =
BANK=
eae
1. This is an error message. In single memory board systems, the
board number is always 1. In multiple board systems, the
board assigned the iowest memory address range (e.g.,
O0000-77777) is designated as board 1, the board assigned
the next highest memory address range is designated as board
2, and so on. Refer to the system configuration chart to
determine the slot location of the failing memory board.
Module and bank locations are explained in Chapter 12.