Data General NOVA 4/S Manual page 160

Data General Corporation (DGC) has prepared this manual for use by DGC personnel and customers as a guide to the proper installation, operation, and
maintenance of DGC equipment and soft ware. The drawings and specifications contained herein are the property of DGC and shall neither be reproduced in whole or
in part without DGC's prior written approval nor be implied to grant any license to make, use, or sell equipment manufactured in accordance herewith.
NOVA 4 MEMORY DIAGNOSTIC UNMAPPED PART 1
SAMPLE PROGRAM RUN SUMMARY
(No Errors Found)
DTOS Mnemonic:
Special Machine Requirements:
NOVA 4/S CPU
Operator Input: Comments
!<<ENTER TOP MEMORY ADDRESS
USED FOLLOWED BY AN R>
# <(ENTER FILE NUMBER OF
N4MDU1 FOLLOWED BY A
Program Output:
LOADED <FILE NUMBER OF N4MDU1 >
<TOP MEMORY ADDRESS USED >
Operator Input:
{ <<ENTER STARTING ADDRESS OF Note 2
N4MDU1 FOLLOWED BY AN R>
Program Output:
** PROGRAM EXEC **
INPUT NEW VALUES FOR CF'S
(LF DEFAULT)
Operator Input:
<LINE FEED >
Program Output:
Operator Input:
<0 FOLLOWED BY
CARRIAGE RETURN >
Program Output:
SUPPLEMENTAL ERROR
INFORMATION (Y/N)?
Operator Input:
<N FOLLOWED BY
CARRIAGE RETURN =>
Program Output:
POWER SUPPLY VOLTAGES (0-3)?
Operator Input:
<LINE FEED>
PATTERNS (0-377)?
Operator Input:
<LINE FEED >
*** END PROGRAM ***
2. If you are using INTERIM Cassettes #5, #6.1, or #6.3, the
starting address is 205; otherwise, it is 200.
3. For information on the questions asked by the program and on
error reporting, see p. 57.