Data General NOVA 4/S Manual page 63

Data General Corporation (DGC) has prepared this manual for use by DGC personnel and customers as a guide to the proper installation, operation, and
NOVA 4 MAP DIAGNOSTIC
SAMPLE PROGRAM RUN SUMMARY
(No Errors Found; DTOS Auto Mode)
DTOS Mnemonic: N4MP DIAG Program Output:
DTOS Directory: HOST
DTOS Command: SELECT OR CSELECT ENTER DISK DEVICE CODE
Special Machine Requirements: NOVA 4/X CPU
Reference: Listing No. 096-001131 Operator Input:
Estimated Program Run Time: 5 minutes
<ENTER APPROPRIATE NUMBER -
33, 73, 27, OR 67>
Program Output: Note 4
ACTIVE DIRECTOR Y=HOST
N4MP DIAG OO RUNNING
PASS 2
PASS 3
PASS 5
Operator Input:
CSELECT N4MP DIAG
(O=STANDARD DISK, 1 ZEBRA DISK,
2=1/0 TESTER
Operator Input:
Program Output: Notes
1. Memory size varies with memory board configuration.
IS THIS A 4231 OR 6070 TYPE DISK? Note 3
Operator Input:
3. Answer "yes" if the disc is either a 4231 or a 6070.
OR 1 - FOLLOWED BY A CARRIAGE 4. The remaining program output is the same as that generated
RETURN > when the program is run using the SELECT command.