Data General NOVA 4/S Manual page 137

Data General Corporation (DGC) has prepared this manual for use by DGC personnel and customers as a guide to the proper installation, operation, and
maintenance of DGC equipment. and software. The drawings and specifications contained herein are the property of DGC and shall neither be reproduced in whole or
in part without DGC's prior written approval nor be implied to grant any license to make, use, or sell equipment manufactured in accordance herewith.
CONSOLE PC BOARD
REPLACEMENT FOR 5-SLOT
CHASSIS
the Fan Replacement For 5-Slot Chassis
procedure (p.120) and perform steps 1-8.
. Unplug cable P3 on the back of the console PC board.
. Remove the 4 screws which mount the PC board to its
stand-offs. (Each screw has 2 washers.)
. Mount the new PC board and replace the screws and
. Plug cable P3 into the new PC board.
. Go to page 121 and perform steps 13-18.