Data General NOVA 4/S Manual page 68

maintenance of DGC equipment and soft ware. The drawings and specifications contained herein are the property of DGC and shall neither be reproduced in whole or
in part without DGC's prior written approval nor be implied to grant any license to make, use, or sell equipment manufactured in accordance herewith.
NOVA 4 FLOATING POINT TEST
SAMPLE PROGRAM RUN SUMMARY
(No Errors Found; DTOS Auto Mode)
NOVA 4/S or 4/X CPU with
multiplty/divide option
Operator Input: Comments
*SELECT DGCFP
SELECT DGCFP
ACTIVE DIRECTORY =HOST
LOAD:
DGCFP REV. OO
DGC NOVA FLOATING POINT DIAGNOSTIC REV. 0O
SELF-DIAGNOSTIC RUNNING
PASS 1
Operator Input:
*CSELECT DGCFP
CSELECT DGCFP
(O=STANDARD DISK, 1=ZEBRA DISK, Note 1
Operator Input:
<<ENTER APPROPRIATE NUMBER -
O, 1 OR 2 - FOLLOWED BY A CARRIAGE RETURN >
Operator Input:
O OR 1 - FOLLOWED BY A CARRIAGE RETURN >
ENTER DISK DEVICE CODE Notes
1. ZEBRA DiSK means DGC model 6060, 6061 or 6067 disc
<ENTER APPROPRIATE NUMBER - 2. Answer "'yes"' if the disc is either a 4231 or a 6070.
33, 73, 27 OR 67>
3. The remaining program output is the same as that generated
Program Output: Note 3 when the program is run using the SELECT command.
36