Data General NOVA 4/S Manual page 61

Data General Corporation (DGC) has prepared this manual for use by DGC personne! and customers as a guide to the proper installation, operation, and
maintenance of DGC equipment and soft ware. The drawings and specifications contained herein are the property of DGC and shall neither be reproduced in whole or
in part without DGC's prior written approval nor be implied to grant any license to make, use, or sell equipment manufactured in accordance herewith.
NOVA 4 MEMORY DIAGNOSTIC, MAPPED
SAMPLE PROGRAM RUN SUMMARY
(No Errors Found; DTOS Auto Mode)
DTOS Mnemonic: N4MDM
DTOS Directory: HOST
DTOS Command: SELECT
Special Machine Requirements: NOVA 4/X CPU
Reference: Listing No. 096-001132
Estimated Program Run Time: 1 Minute
Operator Input: Comments
*SELECT N4MDM
Program Output:
ACTIVE DIRECTORY=HOST
PROCESSOR UNDER TEST=HOST
N4MDM REV. OO < Date >
N4MDM REV. OO
**PROGRAM EXEC**
TEST NAME: MODIFIED DATA=ADDRESS
TEST NAME: DATA=ADDRESS UPPER
TEST NAME: STUCK ADDRESS BIT
TEST NAME: MARCHING 1-0
TEST NAME: GALLOPING COLUMNS
TEST NAME: GALLOPING ROWS
TEST NAME: GALLOPING DIAGONAL
Note
TEST NAME: GALLOPING DIAGONAL
TESTING COMPLETED... the end of the program test for each board. The board
assigned the lowest memory address range (e.g., OOOO0-77777)
BOARD NUMBER= Note 1 is designated as board 1; the board assigned the next highest
ADDRESS START= address range is designated as board 2, and so on.
ADDRESS END=
RAM TYPE= The addresses (0-177) refer to the physical 1K blocks and vary
***END PROGRAM *** RAM (16K or 4K) depends upon the size of the memory board
PASS 1 being tested.