Data General NOVA 4/S Manual page 162

Data General Corporation (DGC) has prepared this manual for use by DGC personnel and customers as a guide to the proper installation, operation, and
maintenance of DGC equipment and software. The drawings and specifications contained herein are the property of DGC and shall neither be reproduced in whole or
in part without DGC's prior written approval nor be implied to grant any license to make, use, or sell equipment manufactured in accordance herewith.
NOVA 4 MEMORY DIAGNOSTIC, MAPPED
SAMPLE PROGRAM RUN SUMMARY
(No Errors Found)
DTOS Mnemonic:
Special Machine Requirements:
Operator Input: Comments
177777R
#ENTER FILE NUMBER FOR N4MDM
FOLLOWED BY A CARRIAGE RETURN
Program Output:
Le ee Note 1
LOADED <FILE NUMBER FOR N4MDM > 077777
Operator Input:
! <(ENTER STARTING ADDRESS Note 2
FOR N4MDM FOLLOWED BY AN R>
Program Output:
N4MDM REV. 00 <DATE>
** PROGRAM EXEC **
INPUT NEW VALUES FOR CF'S
{(LFDEFAULT)
MODULES TO BE TESTED (0-17)?
Operator Input:
<LINE FEED>
Program Output:
ECM (0-4)?
Operator Input:
<0 FOLLOWED BY A
CARRIAGE RETURN >
Program Output:
SUPPLEMENTAL ERROR
INFORMATION (Y/N)?
Operator Input:
<<N FOLLOWED BY A
CARRIAGE RETURN >
148
POWER SUPPLY VOLTAGES (0-3)?
Operator Input:
<LINE FEED >
Program Output:
Operator Input:
<LINE FEED >
Program Output:
TESTING COMPLETED
*** END PROGRAM ***
1. The program may output the number of each file which it passes
before it reaches the specified file.
2. If you are using INTERIM Cassettes #5, #6.1, or #6.3, the starting
address is 240; otherwise, it is 200.
3. For information on the questions asked by the program and on error