Device Cabling; Cabling An Ide Device - NEC POWERMATE P - SERVICE MANUAL 1996 Service And Reference Manual

Device Cabling

All storage devices require a power and signal cable connection. Devices shipped with the
system are already connected. Cable optional devices as follows.

Cabling an IDE Device

Connect the IDE signal cable connector to the connector on the IDE device.
1.
Take care to prevent bending drive connector pins. Align the IDE cable connector
as shown in Figure Section 3-16.
2. Locate an available power connector coming from the power supply.
3. Connect the appropriate power cable to the power connector on the IDE device.
Figure Section 3-16 Connecting IDE Device Cables
If installing an IDE CD-ROM reader, also connect the audio cable (see the
4.
instructions that come with the reader).
Option Installation 3-23