How To Start Setup - NEC POWERMATE P - SERVICE MANUAL 1996 Service And Reference Manual

2-12 Setup and Operation
n
configure system connections for peripherals such as the diskette drive, hard
drives, and devices connected to the printer and serial ports.
n
customize the system with security features such as passwords, diskette drive
restriction, virus check reminder, and system backup reminder.
n
set system parameters if the real-time clock/battery chip is replaced.

How to Start Setup

To start the Setup utility, follow these steps:
1. Turn on or reboot the system. Setup displays the following message:
Press F2. Setup's Main Menu window appears similar to the following screen.
2.
Press <F2> to enter SETUP
NOTE: The screen shown is typical of the
system. The actual items on the Main Menu
depend upon the hardware installed in the
system.