Device Cabling; Cabling An Ide Device; Power Cable Connectors - NEC Direction SP E-Series Reference Manual

Power cable connectors are keyed to fit only in the correct position. The
following figure shows the power cable connectors.

Device Cabling

All storage devices require a power and signal cable connection. Devices
shipped with the system are already connected. Cable optional devices as
follows.

Cabling an IDE Device

1. Connect the IDE signal cable connector to the connector on the IDE device.
Take care to prevent bending drive connector pins. Align the IDE cable
connector as shown in the following figure.
2. Locate an available power connector coming from the power supply.
3. Connect the appropriate power cable to the power connector on the IDE
device.

Power Cable Connectors

Option Installation 3-15