Table of Contents
Advertisement
Replacing the Front Panel — Minitower
Replace the front panel as follows.
Note:
removed a 5 1/4-inch device from your system
and didn't replace it, you need to cover the
opening in the chassis and the front panel.
1. Replace the metal panel in the chassis bay if necessary.
Press the panel into the opening.
2. Replace the blank plastic panel if necessary. Press the
blank panel into the inside of the front panel (over the
empty bay). Press until the four tabs lock the panel in
place.
3. Align the four front panel plugs and the two locking tabs
with the mounting holes in the front of the system unit
(see the previous section).
4. Insert the two locking tabs into the holes at the bottom of
the chassis then evenly press the front panel into position
until the plugs lock the panel in place.
5. Replace the left side cover (see "Replacing the Minitower
Side Covers").
5-86 Installing Options
Before replacing the front panel, if you
Advertisement
Table of Contents
