Setup Key Functions - NEC POWERMATE CT User Manual

Boot — Use this menu to set boot options, including restore on
!
ac/power loss, set boot sequence, and assign drive letters to removable
devices.
Exit — Exits the Setup Utility with various save or discard options.
!
Use the keys listed in the legend bar on the bottom of the Setup Menu to
make the selections or exit the current menu. The following table
describes the legend keys.
Key
F1
Esc
Up or down arrow keys
Left or right arrow keys
-/+ keys
Enter
F9
F10
To select one of the six menus from the menu bar, use the left and right
arrow keys. Use the up or down arrow keys to select an item under the
menu.
Menu items preceded by a > contain a submenu of selectable fields for
setting system parameters. Display a submenu by using the up or down
arrow keys to move the cursor to the desired submenu, then press
3-6 Configuring the System

Setup Key Functions

Function
Provides help for the parameter field
being displayed.
Exits the menu.
Moves cursor up and down for item
selection.
Selects next menu.
Changes values.
Executes a command or selects
submenu.
Loads the default configuration values
for the current menu.
Saves the current values and exits
Setup.
.
Enter