NEC POWERMATE CT User Manual page 77

Function
CMOS Clear
Audio
Modem
Riser (AMR)
Rear USB
Device
Wakeup
PS/2
Keyboard at
Power On
Save to RAM
3-40 Configuring the System
Setting System Board Jumpers
Jumper Setting
JP4 2-3
1-2
JP11 1-2
2-3
JP3 2-3
1-2
JP16 2-3
1-2
JP18 Jumpered
Open
Description
Factory setting. Maintains system board
configuration in CMOS RAM with
onboard battery.
Clears CMOS while system power is
off. Return jumper to pins 2 and 3
before powering system on.
CAUTION: To prevent damage to
system board, avoid clearing CMOS
while power is on.
Factory setting. Enables onboard audio
CODEC.
Disables onboard audio CODEC. Use
this setting if an AMR sound card is
installed.
Factory setting. Enables system
wakeup via input from the rear USB
port.
Disables system wakeup via input from
the rear USB port.
Factory setting. Disables the keyboard
at power on.
Enables the keyboard at power on.
Factory setting. Enables Suspend to
RAM (STR) function. In STR mode, the
system saves to memory all
configuration information and all
running programs. When the system
leaves Suspend mode, it restores
everything from memory.
Disables Save to RAM function.