NEC POWERMATE CT User Manual page 58
A powerful, versatile corporate pc
Hide thumbs
Also See for POWERMATE CT:
- Service and reference manual (167 pages) ,
- Configuration manual (1 page) ,
- Release note (8 pages)
Table of Contents
Advertisement
Menu Item
DMI Event Logging
Event Log Capacity
Event Log Validity
View DMI Event Log
Clear All DMI Event Logs
Event Logging
ECC Event Logging
Mark DMI Events As Read
Preboot Management
Default Primary Video Adapter
Advanced Menu
Settings (default is bold)
Press Enter to access the following
submenus.
Status only.
Status only.
Status only, press Enter to view the Event
Log.
No, Yes
Selecting No prevents clearing out the
DIMM event logs.
Selecting Yes will clear the PMI event log
after rebooting.
Enabled, Disabled
Selecting Enabled permits logging of DMI
events.
Enabled, Disabled
Select Enabled to allow logging of ECC
events.
Press Enter. Select Yes or No to "Mark all
Events as read?"
Disabled, Enabled
Select Enabled to enable the Preboot
Management function.
AGP, PCI
Select PCI to have a PCI card, if installed,
used for the boot display device.
Select AGP to have the AGP card, if
installed, used for the boot display device.
Configuring the System 3-21
Advertisement
Table of Contents
