Main Menu; Setup Key Functions - NEC POWERMATE 2000 Service And Reference Manual
Pentium iii 800-mhz or higher processor-based series
Hide thumbs
Also See for POWERMATE 2000:
- Service and reference manual (183 pages) ,
- Service and reference manual (157 pages)
Table of Contents
Advertisement
Use the keys shown on the bottom of the Main Menu to make selections or exit the current
menu. The following table describes the navigation keys.
Key
F1
Esc
Up or down arrow keys
Left or right arrow keys
-/+ keys
Enter
F9
F10
To select one of the six menus from the menu bar, use the left and right arrow keys. Use the up
or down arrow keys to select an item under the menu.
Menu items preceded by a > contain a submenu of selectable fields for setting system
parameters. Display a submenu by using the up or down arrow keys to move the cursor to the
desired submenu, then press
An Item Specific Help window on the right side of each menu displays the help text for the
currently selected Setup option. It updates as the cursor moves to each new field.
Pressing
on any menu brings up the General Help window that describes the legend keys and
F1
their functions.
Press
to exit the current window.
Esc
The following subsections describe the six top level menus and submenus.
Main Menu
Choose the Main Menu by selecting Main in the legend bar on the Main Menu screen. Other
Main Menu options are available by selecting submenus.
Use the arrow keys to select one of the Main Menu options and press
Items with grayed-out text are not available.
Explanations of each Main Menu item are given in the following table.
malfunction.
Note
The following menu information is typical for a system with a 10-GB hard drive and a
CD-ROM drive. The settings on the menu screens may differ, depending upon the hardware
installed in the system.
Setup Key Functions
Function
Provides help for the parameter field being displayed.
Exits the menu.
Moves cursor up and down for item selection.
Selects next menu.
Changes values.
Executes a command or selects submenu.
Loads the default configuration values for the current menu.
Saves the current values and exits Setup.
.
Enter
Setting items on this menu to incorrect values can cause the system to
to select a submenu.
Enter
System Configuration 2-7
Advertisement
Table of Contents
