Replacing Internal Drives; Removing A 3 1/2-Inch Internal Drive - NEC POWERMATE CT User Manual
A powerful, versatile corporate pc
Hide thumbs
Also See for POWERMATE CT:
- Service and reference manual (167 pages) ,
- Configuration manual (1 page) ,
- Release note (8 pages)
Table of Contents
Advertisement
Replacing Internal Drives
The internal drives in the system are housed in a removable hard drive
bracket. The hard drive bracket is fitted to the accessible device cage, and
it is held in place by two screws on the front of the chassis.
The following sections describe in detail how to install 3 1/2-inch internal
drives in the system. The installation procedures include:
removing a 3 1/2-inch internal drive
!
installing a 3 1/2-inch internal drive.
!
Removing a 3 1/2-Inch Internal Drive
Remove the system unit cover and front panel (see "Removing the
1.
Cover" and "Removing the Front Panel").
power and unplug the system power cable. Power is removed only when
the power cable is unplugged.
Locate the internal drive bracket within the system (see the following
2.
figure).
A – Internal Drive Bracket
B – Front of Chassis
4-44 Installing Options
Before removing the cover, turn off system
Locating the internal drive bracket
C – Accessible Device Cage
Advertisement
Table of Contents
