NEC POWERMATE CT User Manual page 54
A powerful, versatile corporate pc
Hide thumbs
Also See for POWERMATE CT:
- Service and reference manual (167 pages) ,
- Configuration manual (1 page) ,
- Release note (8 pages)
Table of Contents
Advertisement
Menu Item
Serial Port B
Mode
Base I/O Address
Interrupt
Parallel Port
Base I/O Address
Interrupt
Advanced Menu
Settings (default is bold)
Disabled, Enabled, Auto
Setting at Enabled allows the user to
configure the port.
Setting at Auto enables the BIOS or
operating system to configure the port.
Normal, IR
Selecting Normal sets the port for normal
use. IR not used for this configuration.
2F8, 3E8, 2E8, 3F8
Selects the base I/O address for serial
port B.
IRQ3, IRQ4
Selects the IRQ for serial port B.
Disabled, Enabled, Auto
Setting at Enabled allows the user to
configure the port.
Setting at Auto enables the BIOS or
operating system to configure the port.
378, 278, 3BC
Selects the base I/O address for the LPT
port.
IRQ5, IRQ7
Selects the IRQ for the LPT port.
Configuring the System 3-17
Advertisement
Table of Contents
