NEC POWERMATE CT User Manual page 19

Universal Serial Bus port
!
This port adds USB capability at the rear of the system. A second
USB port is on the front of the system.
Serial port 1 (COM A) and serial port 2 (COM B)
!
Attach a serial device with a 9-pin connector to these serial ports.
Serial devices include a pointing device, serial printer, or a modem.
Printer port
!
Use this port to connect a parallel printer with a 25-pin connector to
the system.
MIDI/Game port
!
Use this port to attach a musical MIDI device or a gaming device to
your system.
VGA monitor connector
!
The system comes with a video graphics array (VGA) connector on
the 4X accelerated graphics port (AGP) video board installed in your
system. Attach the signal cable from your monitor to the VGA
connector on the video board. Use this port to connect an NEC
®
MultiSync monitor, NEC VistaScan™ monitor, or other
VGA-compatible monitor with a 15-pin connector.
Audio connectors
!
The system comes with sound integrated on the system board. The
following audio connectors are at the rear of the system (see the
preceding figure for locations).
— Microphone in jack
Use this jack to connect a microphone for recording audio
information in your data system files.
— Line in jack
Use this jack to connect a stereo audio device such as a stereo
amplifier or a cassette or minidisc player for playback or
recording.
— Line out jack
Use this jack to connect an amplified output device, such as
powered speakers or headset, a stereo tape recorder, or an external
amplifier for audio output.
Reviewing System Features 1-9