This chapter provides installation instructions for a variety of industry-
standard and NECC expansion options that you can add to your system.
Included in the chapter are procedures for
expansion board installation
!
memory module upgrade
!
processor upgrade
!
data storage device installation.
!
Most procedures require removal of the system's cover. Some procedures
also require removing the front panel. Procedures for removing the cover
and front panel are included in this chapter.
In addition, the chapter includes procedures for setting up the system in a
desktop orientation or back to the minitower orientation.
General Rules
Follow these general rules when installing system options.
Turn off system power and unplug the power cable.
!
Turn off and disconnect all peripherals from the front or rear of the
!
system.
When handling boards or chips, touch the system metal frame to
!
discharge static.
Do not disassemble parts other than those specified in the procedure.
!
All screws are Phillips-head unless otherwise specified.
!
Label any cable connector before disconnecting it. Note where the
!
connector goes and in what position it was installed.
4-2 Installing Options