NEC POWERMATE CT User Manual page 55

Menu Item
Mode
DMA Channel
Floppy Disk Controller
Game Port & Midi
Base I/O Address
Base I/O Address/IRQ
Large Disk Access Mode
3-18 Configuring the System
Advanced Menu
Settings (default is bold)
Output Only, Bi-directional, ECP, EPP
Selects parallel port mode.
DMA 3, DMA 1
Sets the DMA channel for the parallel port.
Disabled, Enabled, Auto
Setting at Enabled allows the user to
configure the controller.
Setting at Auto enables the BIOS or
operating system to configure the controller.
Auto, Disabled, Enabled
Configures the Game Port
Enabled allows selection of Base I/O
Address and Base I/O Address/IRQ.
201, 209, 211, 219
Game port address configuration.
330 IRQ_10, 300 IRQ_5, 310 IRQ_10,
320 IRQ_5,
Address configuration for Midi port. The Midi
port and Game port must be
Enabled/Disabled at the same time.
Other, DOS
Select DOS if using DOS operating system.
Select Other if using another operating
system such as UNIX or Novell NetWare.