Connecting Device Cables
The cables used for installing replacement or optional storage devices
include:
two-connector signal cable for the diskette drive
!
three-connector Ultra ATA/66 signal cable for the hard drive
!
three-connector IDE signal cable for the CD-ROM drive, DVD-ROM
!
drive, CD-RW drive, or Zip drive
system power cables in various lengths come from the power supply
!
to accommodate a variety of supported storage configurations.
Use the following figure and table to configure IDE drives on the primary
and secondary IDE connectors on the system board.
Locating system board cable connectors
A – CD Audio In
B – Diskette Drive Connector
4-28 Installing Options
C – Primary IDE Connector (IDE1)
D – Secondary IDE Connector (IDE2)