Installing A Rimm Or Continuity Module - NEC POWERMATE CT User Manual
A powerful, versatile corporate pc
Hide thumbs
Also See for POWERMATE CT:
- Service and reference manual (167 pages) ,
- Configuration manual (1 page) ,
- Release note (8 pages)
Table of Contents
Advertisement
A – Plastic Clip (2)
Installing a RIMM or Continuity Module
Use the following steps to install a RIMM module or continuity module.
Remove the cover (see "Removing the Cover" earlier in this chapter).
1.
If you need to remove a currently installed RIMM or continuity
2.
module, see "Removing a DIMM or Continuity Module" earlier in
this chapter.
discharge by touching the chassis.
Grasp the new module in the middle and align the notches on the new
3.
module with the keys in an empty RIMM socket (see the following
figures).
Press the module firmly into the socket.
4.
Make sure the plastic clips at both ends of the module click closed.
5.
4-20 Installing Options
Removing a RIMM module
Before you install a module, reduce static
B – RIMM Module
Advertisement
Table of Contents
