Setup Key Functions - NEC POWERMATE 2000 Service And Reference Manual

Advanced  Use the Advanced Menu to set the system for Plug and
!
Play, PCI configuration, serial port and printer port addresses and
interrupts, memory cache configurations, I/O device configuration, DMI
event logging, and more.
Security  Use this menu to set User and Supervisor Passwords, security
!
mode, password on boot, network boot, virus check, and more.
!
Power — Use the Power Menu to set power management parameters
such as power savings, auto suspend timeout, hard disk timeout, and
system switch.
!
Boot — Use this menu to set boot options, including restore on ac/power
loss, set boot sequence, and assign drive letters to removable devices.
Exit  Exits the Setup Utility with various save or discard options.
!
Use the keys shown on the bottom of the Main Menu to make selections or exit
the current menu. The following table describes the navigation keys.
Key
F1
Esc
Up or down arrow keys
Left or right arrow keys
-/+ keys
Enter
F9
F10
To select one of the six menus from the menu bar, use the left and right arrow
keys. Use the up or down arrow keys to select an item under the menu.
Menu items preceded by a > contain a submenu of selectable fields for setting
system parameters. Display a submenu by using the up or down arrow keys to
move the cursor to the desired submenu, then press
An Item Specific Help window on the right side of each menu displays the help
text for the currently selected Setup option. It updates as the cursor moves to
each new field.
Pressing
F1
legend keys and their functions.
Press Esc
The following subsections describe the six top level menus and submenus.
2-8 System Configuration

Setup Key Functions

Function
Provides help for the parameter field being displayed.
Exits the menu.
Moves cursor up and down for item selection.
Selects next menu.
Changes values.
Executes a command or selects submenu.
Loads the default configuration values for the current menu.
Saves the current values and exits Setup.
on any menu brings up the General Help window that describes the
to exit the current window.
Enter .