Basic Nic Settings - Dalsa Z-Trak2 2K Series User Manual

For NICs with GigE Vision cameras/sensors connected, only the two following options should be enabled:
•
Teledyne DALSA Sapera GigE Vision Filter Driver
•
Internet Protocol Version 4 (TCP/IPv4)

Basic NIC Settings

The following describe the recommended settings for a NIC used with GigE Vision devices.
To configure the NIC
1. In the Properties dialog, click Configure.
2. Select the Advanced tab.
Parameters may differ according to the adapter. Recommended values for GigE connections are provided below.
For detailed description of the configuration parameters of the GigE connection, please refer to the Teledyne
GigE Vision Interface Optimization Guide.
Z-Trak Family of 3D Sensors
Teledyne Vision Solutions
Appendix • 161