Network Adapter Configuration For Gige Vision Devices; Reference Documents; Nic Properties - Dalsa Z-Trak2 2K Series User Manual

Network Adapter Configuration for GigE Vision
Devices

Reference Documents

The following documents may contain helpful information for network settings. Both are included with Sapera LT.
Sapera LT Getting Started Manual for GigE Vision Cameras and 3D Sensors
•
On the Start menu, open Teledyne DALSA Sapera LT, select Documentation, then open
SaperaGettingStarted_GigE_Cameras.pdf.
Teledyne GigE Vision Interface User Manual and Optimization Guide
This Sapera LT 9.0 document describes the GigE Vision Interface and how configure your network equipment
(switch, network adapter, etc.) to optimize performance for different application requirements.
•
On the Start menu, open Teledyne GigE Vision Interface > User Manual & Network Optimization Guide
(PDF).

NIC Properties

The Ethernet configuration of a NIC (network adapter) is done through its Properties dialog.
To open the Properties dialog of the NIC
1. On the Start menu, open Settings and select Network & Internet.
2. Select Change adapter options.
3. Select the NIC used with GigE cameras and open its Properties dialog.
160 • Appendix
Teledyne Vision Solutions
Z-Trak Family of 3D Sensors