Structural Concepts FSI656R User Manual page 4

OVERVIEW / TYPE / COMPLIANCE / WARNINGS / PRECAUTIONS / WIRING DIAGRAM - PAGE 2 of 2
PRECAUTIONS
•
This sheet contains important precautions to prevent
damage to unit or merchandise.
•
Please read carefully!
•
See previous page for specifics on OVERVIEW,
CONDITION TYPE, COMPLIANCE and WARNINGS.
CAUTION
CAUTION
CAUTION! LED LAMP REPLACEMENT GUIDELINES
LED lamps reflect specific size, shape and overall design.
Any replacements must meet factory specifications.
CAUTION! GFCI BREAKER USE REQUIREMENT
If N.E.C. (National Electric Code) or your local code
requires GFCI (Ground Fault Circuit Interrupter) protection,
you MUST use a GFCI breaker in lieu of a GFCI receptacle.
CAUTION! ADVERSE CONDITIONS / SPACING ISSUES
• Performance issues caused by adverse conditions are NOT warranted.
• Rear panels must be kept at least 6" from walls and structures.
• Case must not be exposed to direct sunlight or any heat source.
• To maintain proper case temperature, keep case at least 15-feet from exterior
doors, overhead HVAC vents or any air curtain disruption.
• Self-contained case clearance: 6" min. air intake / 6" min. air discharge.
CAUTION! CHECK CONDENSATE PUMP CONNECTIONS
Water on flooring can cause extensive damage!
Carefully check the following before powering up case:
• Condensate pump must be plugged into receptacle.
• Condensate lines must be connected to condensate pump.
CAUTION! CHECK CONDENSATE PAN POSITION & PLUG!
Water on flooring can cause extensive damage!
• Before powering up case, check that c ondensate pan is positioned
directly under case's condensate drain.
• Before powering up case, check that condensate pan's electrical plug is
SECURELY connected to condensate system's receptacle.
CAUTION! DO NOT RELY ON THERMOMETERS OR THERMOSTATS
FOR ACTUAL PRODUCT (FOOD) TEMPERATURES.
• Thermometers and thermostats reflect air temperatures ONLY.
• For ACTUAL food temperatures, use a calibrated food probe.
WIRING DIAGRAM
•
Each case has its own wiring diagram folded and in
its own packet.
•
Wiring diagram placement may vary; it may be
placed near ballast box, field wiring box, raceway
cover, or other related location.
4