OVERVIEW / TYPE / COMPLIANCE / WARNINGS / PRECAUTIONS / WIRING DIAGRAM - PAGE 1 of 2
OVERVIEW
•
These Structural Concepts merchandisers are
designed to merchandise packaged products at 41 °F
(5 °C) or less product temperatures.
•
Cases should be installed and operated according to
this operating manual's instructions to ensure proper
performance.
•
Improper use will void warranty.
CID UNITS - TYPE 2 CONDITIONS
These units are designed for the display of products in
ambient store conditions where temperatures and
humidity are maintained within a specific range.
•
These CID units are designed for Type 2 conditions.
•
Type 2 conditions are ambient conditions of 60%
maximum humidity and maximum temperatures of
80 °F (27 °C).
ATTENTION
CONTRACTORS
WARNING
ELECTRICAL
HAZARD
WARNING
KEEP
HANDS
This equipment MUST be installed in compliance with
all applicable NEC, federal, state and local
electrical and plumbing codes.
Risk of electric shock. Disconnect power before servicing unit.
CAUTION! More than one source of electrical supply is
employed with units that have separate circuits.
Disconnect ALL ELECTRICAL SOURCES before servicing.
Hazardous moving parts. Do not operate unit with covers removed.
Fan blades may be exposed when deck panel is removed.
Disconnect power before removing deck panel.
WARNING! POWER CORD AND PLUG MAINTENANCE
Risk of electric shock. If cord or plug becomes damaged,
replace only with cord and plug of same type.
WARNING: This product can expose you to chemicals, including
Urethane (Ethyl Carbamate), which are known to the state of
California to cause cancer and birth defects or other reproductive
harm. For more information go to P65Warnings.ca.gov.
3
COMPLIANCE
•
Performance issues when in violation of applicable
NEC, federal, state and local electrical and plumbing
codes are not covered by warranty.
•
See below compliance guideline.
WARNINGS
•
This sheet contains important warnings to prevent
injury or death. Please read carefully!
REFRIGERANT DISCLOSURE STATEMENT
•
This equipment is prohibited from use in California
with any refrigerants on the "List of Prohibited
Substances" for that specific end-use, in accordance
with California Code of Regulations, title 17, section
95374.
•
This disclosure statement has been reviewed and
approved by Structural Concepts and Structural
Concepts attests, under penalty of perjury, that these
statements are true and accurate.
COMPLIANCE
WARNING
WARNING
Need help?
Do you have a question about the FSI656R and is the answer not in the manual?