Equipment Checklist; Package Contents; Required Rack-Mounting Equipment - SMC Networks 6608M INT User Manual

Equipment Checklist

Package Contents

In addition to this user guide, the package should contain:
one (1) TigerSwitch 100 switch
• Model SMC6608T (8 10BASE-T/100BASE-TX ports)
or
• Model SMC6608M (2 4-port module slots with protective
two (2) brackets with screws for rack mounting the unit
four (4) rubber foot pads
appropriate power cord(s)
SMC Warranty Registration Card — be sure to complete and
return this card within 90 days

Required Rack-Mounting Equipment

Be sure to have the following equipment available when
mounting your switch in a rack:
Four rack-mounting screws
A screwdriver (Phillips-head or flathead, depending on the
type of screws used)
*Note: Be sure to install the module(s) you are planning to use in this unit
before you proceed with mounting the switch and applying power.
Please refer to the installation guide included with each module for
specific installation instructions.
covering plates)*
I
NSTALLATION
3-3