Mounting And Stacking The Switch On A Flat Surface; Attaching The Adhesive Feet - SMC Networks 6608M INT User Manual

I
NSTALLATION

Mounting and Stacking the Switch on a Flat Surface

1. Attach the four adhesive feet to the hollow spaces on the
bottom of the switch.
Figure 3-3. Attaching the Adhesive Feet
2. Set the switch on a flat surface near an AC power source,
making sure there are at least 4 inches (10 cm) of space in
the front and back for proper air flow.
3. To stack switches, repeat Step 1 for every subsequent switch
and then gently place each new switch on top of the
previous switch.
3-6