Equipment Checklist; Hub Packing List; Optional Rack-Mounting Equipment - SMC Networks TigerStack II 10/100 User Manual

Equipment Checklist

After unpacking the TigerStack II 10/100 products, check the
contents of each box against the included packing list to be sure
you've received all the components. Then, before beginning the
installation, be sure you have all the necessary equipment.

Hub Packing List

TigerStack II 10/100 hub
K
Four adhesive feet
K
Bracket Mounting Kit containing two brackets and four screws
K
for attaching the brackets to the hub
Stacking Cable
K
Power Cord—either US, Continental Europe or UK
K
This User Guide
K
SMC Warranty Registration Card—be sure to complete and
K
return to SMC

Optional Rack-Mounting Equipment

If you plan to rack-mount the hubs, be sure to have the following
equipment available:
Four mounting screws for each device you plan to install in a
K
rack—these are not included
A screwdriver (Phillips or flathead, depending on type of
K
screws used)
I S
NSTALLING THE
3-3
TACK