Materials; Environmental Conditions; Environmental Conditions Electrical Version - Invacare Rea Azalea Assist Service Manual

H
Adjustable
azalea
minor
backrest
azalea
minor,
pushbar
adjustable
azalea max
backrest
azalea max,
push handle
Component
A 25
20
B
C 16
D 22
E 26
F
24
G 19
H 27
38
B
D
B
B
D
H
D
B
B
F
D
D
Diameter (mm)
8.2 Materials
Chassis, backrest tubes
Plastic parts like push handles,
brake handles, foot plates and
parts of most options
Upholstery (seat and backrest)
Table
Seat plate
Other metal parts
Screws, washers and nuts
All materials used are protected against corrosion. We
use only REACH compliant materials and components.
Theft and metal detection systems: in seldom cases
the materials used in the wheelchair may activate theft
and metal detection systems.
8.3 Environmental conditions
Storage and
transportation
Temperature -20 °C to 40 °C
20 % to 90 % at 30 °C, not
Relative humidity
condensing
Atmospheric
800 hPa to 1060 hPa
pressure
Be aware that when a wheelchair has been stored
under low temperatures, it must be adjusted to
operating conditions before use.
8.4 Environmental conditions Electrical
Version
Storage and
transportation
Temperature -10 °C to 50 °C
Relative humidity 20 % to 80 %, not condensing
Atmospheric
700 hPa to 1060 hPa
pressure
8 Technical Data
Steel, powder coated
Thermoplastic (e.g. PA, PE,
PP, ABS and TPE) according
to marking on the parts
Foam PUR and polyether,
polyurethane-coated fabric
and plush
ABS
Coated Birch plywood
Zinc alloys, aluminum alloys
and steel
Steel, corrosion free
Operation
-5 °C to 40 °C
Operation
5 °C to 40 °C
1580313-K