Table of Contents
Advertisement
Rea® Clematis® Pro
11.2 Maximum Weight of Removable
Parts
Maximum weight of removable parts
Part:
Leg rest angle adjustable
with calf pad and footrest
Armrest
Rear wheel 600 mm (24")
solid with handrim and
spoke guard
Headrest / Neckrest / Cheek
support
Trunk support
Backrest cushion
Seat cushion
Table tray
11.3 Tyres
The ideal pressure depends on the tyre type:
The table below is an indication. In case the tyre differs
from the list below, check the side of the tyre, the maximum
pressure is listed there.
11.4 Materials
Chassis, backrest tubes
Plastic parts like push handles, brake handles, foot plates and
parts of most options
Upholstery (seat and backrest)
Table
Seat plate
Other metal parts
Screws, washers and nuts
All materials used are protected against corrosion. We use only REACH compliant materials and components.
Theft and metal detection systems: in seldom cases the materials used in the wheelchair may activate theft and
metal detection systems.
11.5 Environmental conditions
Temperature
Relative humidity
Atmospheric pressure
Be aware that when a wheelchair has been stored under low temperatures, it must be adjusted to operating conditions
before use.
44
Maximum weight:
3,2 kg
2,0 kg
2,5 kg
1,4 kg
0,8 kg
2,0 kg
1,9 kg
3,9 kg
Storage and transportation
-20 °C to 40 °C
Tyre
Pneumatic profiled tyre:
610 x 35 mm (24" x 1 3/8")
Solid tyre:
305 x 45 mm (12" x 1 3/4")
610 x 35 mm (24" x 1 3/8")
Solid tyre:
150 x 30 mm (6" x 1 1/4")
200 x 30 mm (8" x 1 1/4")
200 x 45 mm (8" x 1 3/4")
The compatibility of the tyres listed above depends
on the configuration and/or model of your wheelchair.
In case of a tyre puncture consult a suitable workshop
(e.g. bike repair shop, bicycle dealer ...) to have the
tube replaced by a skilled person.
The size of the tyre is mentioned on the sidewall of
the tyre. The change of appropriate tyres must be
carried out by a qualified technician.
CAUTION!
– The tyres pressure have to be equal in both
wheels to avoid a less driving comfort, to keep
the brakes efficiency and an easy propelling of
the wheelchair.
Steel, powder coated
Thermoplastic (e.g. PA, PE, PP, ABS and TPE) according to
marking on the parts
Foam PUR and polyether, polyurethane-coated fabric and
plush
ABS
Coated Birch plywood
Zinc alloys, aluminum alloys and steel
Steel, corrosion free
20 % to 90 % at 30 °C, not condensing
800 hPa to 1060 hPa
Max. pressure
65 psi
4.5 bar
450 kPa
-
-
-
-
-
-
Operation
-5 °C to 40 °C
1653395-C
Advertisement
Table of Contents
