Mounting instruction
Assemble gas piston — Backrest and seat
WARNING!
Safety risk
The wheelchair may collapse
– Be careful when removing the safety pins for the
backrest or seat gas pistons.
– Always reinsert and fasten the safety pins or the safety
shackle when they have been removed.
– Check that the safety pins or the lock shackle / loop is
securely locked.
Assembling gas piston to the chassis - Azalea
Seat tilt
1. Assemble the gas piston A to the front and the
rear attachment.
2. Fixate the gas piston A with the safety pin and
the locking washer B in the rear attachment.
3. Fixate the gas piston A with the plastic spacers
C and the safety pin and locking washer D in
the front attachment.
Backrest
1. Assemble the gas piston E to the front and the
rear attachment.
2. Fixate the gas piston with the safety shackle F
in the rear attachment.
3. Fixate the gas piston with the pin and locking
washer G in the front attachment.
1605201-A
2017-01-01
1
A
B
C
D
Invacare Rea AB
V äxjövägen 303
SE-343 71 Diö
Sweden
Rea® Azalea, Dahlia
Gas piston kit
Gas piston attachment Azalea Max
1. Assemble the gas piston attachment H on the
gas piston.
2. Fixate the attachment with the safety pin and the
locking washer I.
3. Assemble the gas piston E to the front and the
rear attachment.
4. Fixate the gas piston with the safety shackle F
in the rear attachment.
5. Fixate the gas piston with the pin and locking
washer G in the front attachment.
Assembling gas piston to the chassis - Dahlia
Seat tilt
B
B
A
C
C
Dahlia 30
1. Assemble the gas piston A to the front and the
rear attachment.
2. Fixate the gas piston with the safety pin and the
locking washer B and C.
B
B
A
C
C
Dahlia 45
Need help?
Do you have a question about the Rea Azalea Series and is the answer not in the manual?
Questions and answers