Memorizing The New Dsp Surround Sound - Aiwa XR-M1000 Operating Instructions Manual

MEMORIZING THE NEW DSP SURROUND
SOUND
Up to 5 DSP SURROUND sounds can be memorized as the
manual modes Ml - M5.
1
2
3
4
SURROUND
Set a new DSP SURROUND sound
TIME, EFFECT, and MULTI JOG.
with DELAY
See "SETTING A NEW DSP SURROUND SOUND
MANUALLY".
Within 8 seconds, press ENTER.
l-he
pointer "<" flashes to select one of the manual modes
Ml - M5.
o If this step is not completed within 8 seconds, press
SURROUND first to display "DSP ON" on the stereo receiver.
Then press ENTER within 4 seconds.
!hlithin 8 seconds, turn MULTI JOG to select one
of the manual modes Ml - M5.
\iVithin 8 seconds, press ENTER.
The new DSP SURROUND sound is memorized.
To
select the stored DSP SURROUND sound
Press SURROUND, and turn MULTI JOG to select one of the
manual modes Ml - M5 within 4 seconds,
At this time the corresponding graphic equalizer mode is selected
automatically.
m
When the MIC or ECHO level is changed (page 18), the DSP
SURROUND mode is automatically canceled.
ENGLISH 1 I