Specifications; English - Aiwa XR-M1000 Operating Instructions Manual

STEREO RECEIVER MX-NM1 000
FM tuner section
Tuning range
Usable sensitivity (IHF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Power output
Total harmonic distortion
Inputs
outputs
General
Power requirements
Power consumption
Dimensions of main unit
(W XHXD)
Weight of main unit
87,5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
350 pV/m
Loop antenna
65 W+65W (50 Hz-20 kHz, THD
less than 1%, 6 ohms)
0.1
7.
(8 W, 1 kHz, 6 ohms, DIN
AUDIO)
VI DEO/AUX: 150 mV (adjustable)
MD: 150 mV (adjustable)
MIC 1, MIC 2:1 mV (10 kohms)
LINE OUT: 210 mV
SPEAKERS: accept speakers of 6
ohms or more
SURROUND SPEAKERS:
accept speakers of 8 ohms to 16
ohms
PHONES (stereo jack): accepts
headphones of 32 ohms or more
120 V AC, 60
HZ
105W
260 x 121.5 x 345 mm
(101/4 X 47/8X 135/8 h.)
5.8 kg (12 Ibs 14
OZ. )
CASSETTE DECK FX-NM1 000
Track format 4
tracks, 2 channels stereo
Frequency response Type II (high/CrOz) tape:
50
HZ -16000 HZ
Type I (normal) tape:
50 Hz -150010 HZ
Signal-to-noise ratio 60 dB (Dolby B NR ON, Type II
tape peak level)
Recording system AC bias
Heads Deck 1: Playback hei~d x 1
Deck 2: Recording/playback head
x 1, erase head x 1
Dimensions of main unit 260x121 .5x318mm
(W XHXD)
(101/4 x 07/8x i25/8
irl.)
Weight of main unit
1,8 kg (3 Ibs 15
OZ.)
CD PLAYER DX-NMIOOO
Laser Semiconductor laser (k= 780 nm)
D-A converter
1 bit dual
Signal-to-noise ratio
85 dB (1 kHz, O dB)
Harmonic distortion 0.05 % (1 kHz, OdB'~
Wow and flutter
Unmeasurable
Dimensions of main unit 260x106 x318mrr
(W XHXD)
(101/4 X 01/4X 125/8 h.)
Weight of main unit 2.2 kg (4 Ibs 14
OZ.)
~AKER SYSTEM SX-NMT1 000
Cabinet type
Speakers
Impedance
Output sound pressure level
Dimensions (W x
H x D)
Weight
3 way (magnetic shielded type)
Woofer:
140 mm
(!55/8 h.) cone type X 2
Tweeter:
60 (2 3/s in.) mm cone type
Super tweeter:
20 mm
(13/16 in.) Ceramk type
6 ohms
88 dB/W/m
220 x 440 x 250 mm
(8
3/4X
17
3/8X
97/8 in.)
5.8 kg (12 Ibs 14 OZ.)
Specifications and external appearance are subject to change without
notice.
LCBESYSTEM
The word "BBE" and the "BBE svmbol" are trademarks of BBE
Sound, Inc.
Under license from BBE Sound, Inc.
DOLBY NR
Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol on are trademarks
of Dolby
Laboratories Licensing Corporation.
COPYRIGHT
Pleaee check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used,
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
recel~tion, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
'Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user's
right or authority to operate this product.
GRAPHIC EQUALIZER GE-NM1OOO
Dimensions of main unit 260 x 100.5x 322 mm
(W XHXD) (10'/4 x 4 x 123/, in.)
Weight of main unit
1,0 kg (2 Ibs 3 OZ.)
ENGLISH
33