Dsp Surround - Aiwa NSX-S505 Operating Instructions Manual

MEMORIZING THE NEW EQUALIZATION
CURVES
Up to 4 customized equalization curves can be stored as the
manual modes M1 - M4.
7 Set a new equalization curve with HIGH, LOW,
and MULTI JOG.
See "SETTING ANEW EQUALIZATION CURVE MANUALLY".
The created curve is displayed for 4 seconds.
2 Within 4 seconds, press ENTER.
"M 1" flashes on the display for 4 seconds.
Ew Ge ees, 4
¢ If this step is not completed within 4 seconds, press GEQ
first to display "GEQ ON". Then press ENTER within 4
seconds.
3 Within 4 seconds, turn MULTI JOG to select one
of the manual modes M1 - M4 to store the curve.
4 Within 4 seconds, press ENTER.
- The new equalization curve is stored.
To select the stored equalization curve
Press GEQ, and turn MULTI JOG to select one of the manual
modes M1 - M4 within 4 seconds.
9 ENGLISH
DSP SURROUND
The DSP (Digital Signal Processor) SURROUND adjusts the
delay time, the input mode and the feedback level to give a
resonant surround sound, allowing you to enjoy the real sound
presence of different environments.
This unit has been programmed with 4 different SURROUND
modes. You can also create and memorize up to 4 of your own
surround settings.
SURROUND MODE
1 7 lwleles 2S
MULTI JOG
SURROUND
When you select the programmed DSP SURROUND mode, the
sound presence of a disco (DISCO), live music performance
(LIVE), movie theatre (MOVIE) or concert hall (HALL) can be
obtained.
Press SURROUND, and turn MULTI JOG to select
the desired programmed mode within 4 seconds.
DSP SURROUND
"DSP SURROUND" appears and the DSP SURROUND mode is
displayed cyclically as follows.
DISCO +—> LIVE «-»+ MOVIE +— HALL
ie been seen nee Programmed mode ----------+ |
DSP OFF «—> M4 «> M3 <«—+ M2 «> Mi
(cancel) '
terse Manual mode------:
Equalization curves are selected automatically to match the DSP
SURROUND modes and can also be selected or turned off to
suit your preference.
To display the current DSP SURROUND mode
Press SURROUND. The current mode is displayed for 4 seconds.
To cancel the selected mode
Press SURROUND, and turn MULTI JOG to select "DSP OFF"
within 4 seconds. "DSP SURROUND?" disappears.
When the music source is monaural
Select "LIVE" or "MOVIE" to obtain a simulated stereo effect.
When "DISCO" or "HALL" is selected, no sound will be heard
from the surround speakers.