Setting A New Dsp Surround Sound Manually; Memorizing The New Dsp Surround Sound; Delay (Delay Time); Fb (Feedback Level) - Aiwa NSX-A909 Operating Instructions Manual

SE:TTING A NEW DSP SURROUND SOUND
MANUALLY
Thf? elements of the DSP SURROUND sound can be customized.
DELAY [delay time)
Increasing the number in the display increases the delay time
and surround effect."1
5"," 20, "30", "50" or"1 40 mSec can be
selected.
To acljust the delay time
Press
DE:LAY,
and turn MULTI JOG to select one of the levels
within 4 seconds.
H% L+l~nput mode)
When "1-+[3" is displayed, the surround effect increases,
especially in the center.
When "L-R' is displayed, it increases on the outside.
To select a input mode
Press EFFECT ~, and turn MULTI JOG to select "L-R" or
"L+R within 4 seconds,
FE]
(feedback level)
Increasing the number in the display increases the echo.
A '!evel from "OFF" (0) to"7 can be selected,
To adjust the level of feedback
Press
EFFECT w,
and turn
MULTI JOG
to select one of
the levels within 4 seconds.
Up to 4 DSP SURROUND sound can be memorized as the
manual modes Ml - M4.
*,..
1,3
-1
In
l—
SURROUN.
——
1 Set a new DSP SURROUND sound with DELAY,
EFFECT, and MULTI JOG.
3 Within 4 seconds, turn MULTI JOG to select one
of the manual modes Ml - M4.
4 Mhin 4 seconds, press ENTER.
The new DSP SURROUND sound is memorized
To select the stored DSP SURROUND sound
Press
SURROUND,
and turn MULTI JOG to select one of the
manual modes Ml - M4 within 4 seconds.
m
When the MIC or ECHO level is changed (page 21), the
SURROUND mode is automatically canceled.
ENGLISH
10