Presetting Stations; Preset Number Tuning - Aiwa XR-M1000 Operating Instructions Manual

Aiwa compact disc stereo system operating instructions xr-m1000
Hide thumbs Also See for XR-M1000:
Table of Contents

Advertisement

Available languages

Available languages

I
3
2
0-9,+10
TUNER
BAND
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
1 lPress TUNING/PRESET
once
or twice
so that
"PRESET
NO." in the display
disappears.
2
lPress TUNER
BAND
to select
a band,
and
press
TUNING V
or TUNING A
to select a station.
3 lPress SET to store the station.
A
preset number beginning from 1 in consecutive order for
each band is assigned to the station.
Frequency
Preset number
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
1
2
SET
TUNER BAND
II
I
T+N~G
2
1
Press TUNER BAND to select a band.
Press numbered
buttons
O-9 and +1 O to select a
preset number.
"PRESET NO." appears in the display.
Example:
To select preset number 20, press +10, +10 and O.
To select preset number 15, press +10 and 5.
Selecting
a preset number
on the main unit
1 Press TUNER BAND to select a band.
2 Press TUNING/PRESET
repeatedly so that "PRESET NO."
appears on the display.
3 Press TUNING V
or TUNING
A
to select a station.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
SET. The frequency flashes. Then press SET again within 4
seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
4 lRepeat steps 1 to 3.
"Thenext station will not be stored if a total of 32 preset
Sk3tiOnS
for all the bands have already been stored.
m
If power is interrupted for more than approximately 24 hours,
preset stations stored in memory after purchase need to be reset.
To change the AM tuning
interval
The default setting of the AM tuning interval is 10 kHz/step.
If
you use this unit in an area where the frequency allocation system
is 9 kHz/step,
change
the tuning
interval.
Press POWER while pressing TUNER BAND.
To reset the interval, repeat this procedure.
m
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
ENGLISH
17
'

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents