Timer Recording; When Using The Remote Control; To Check The Specified Time And Source - Aiwa XR-M1000 Operating Instructions Manual

Press CLOCWTIMER three times so that @ REC appears
on the display, then press ENTER within 6 seconds. Carry
out the steps of "SETTING THE TIMER" from step 2 and insert
the tape to be recorded on into deck 2 after step 5.
When using the remote control
Press TIMER N&.e so that 0 REC appears on the display, then
press 1I SET within 6 seconds.
To check the specified time and source
Press CLOCIVTIMER three times (or press TIMER W on the
rennote control). The timer-on time, the selected source name
and the duration for the timer-activated period are displayed for
6 seconds.
?IMER on the remote control is also available instead of CLOCIU
TIMER.
EISET on, the remote control is also available instead of ENTER.
. .U or w on the remote contro/ is also available instead of MULTI
JOG.
ENGLISH 15