Tape Playback; Inserting Tapes; To Select A Reverse Mode; Continuous Play - Aiwa XR-M1000 Operating Instructions Manual

Name
page
4 EJECT (for deck 1)
Deck 1
Deck 2
4EJECT (for deck 2)
DOLBY NR
REV MODE (DECK 2)
SYNC DUB NORM/HIGH
REC/REC MUTE
II PAUSE
I<<, WIMS
<- PLAY/DiR
, STOP
25-29
24-26
27
26-29
25,26
25
25
25-29
The display information of the cassette decks is shown on the
display of the stereo receiver.
A EJECT
Deck 1 Deck 2 AE; ECT
REV"MODE
On deck 1, tapes are always played back on both sides.
On deck 2, you can select a reverse mode to play back one or
both sides.
Use Type I (normal), Type II (high/CrOz) or Type IV (metal)
tapes for playback.
Press A EJECT to open the cassette holder.
A EJECT
u'
I I
Insert a tape with the exposed side down. Push the cassette
holder to close.
To select a reverse mode (deck 2 only)
Each time REV MODE is pressed, the reverse mode changes.
k+;)+cd
To play one side only, select 1.
To play from front side to reverse side once only, select =).
To play both sides repeatedly, select C=).
When tapes are loaded in both decks, Z) on the display
indicates Continuous Play.
24
ENGLISH