Table of Contents
Advertisement
DOLBY SURROUND
With this unit's built-in, Dolby Pro Logic decoder
and surround
speaker system (the center and surround speaker units supplied
in addition to the left and right front speakers), music sources
recorded in Dolby Pro Logic can be played back in full scale
home theater sound.
As for music sources recorded in Dolby Digital, this unit plays
them by using D/A(Digital/Analogue) converter and Dolby Pro
Logic decoder, and outputs the sound from the supplied speakers
in the same way as it does for Dolby Pro Logic recorded sources.
Dialogs are heard in the front and center sound field, while
ambient sounds like cars and crowds are reproduced on all sides
of the listener, all in all for an incredibly Sifelike audio-visual
experience.
Dolby Pro Logic has four independent channels; left, center,
right, and surround. These four channels are encoded into the
two tracks of a conventional stereo program source. This unit's
Dolby Pro Logic software is marked with the DO [bosy suasouna] jogo,
Dolby Digital, in contrast to Dolby Pro Logic, is digitized,
and has separate left and right surround channels plus an
additional low-frequency effects (LFE) channel. Thus it is also
referred to as "5.1-channel" Dolby Digital, with the LFE channel
counted as "0.1" channel.
Dolby Digital software is marked with the DOs]
logo.
* This unit cannot output the DTS Digital Surround system sound
from the supplied speakers by itself. To playback in the DTS
Digital Surround system, this unit needs to be connected to a
DTS decoder unit or an amplifier equipped with a DTS decoder
via the DIGITAL AUDIO OUT (OPTICAL) jack.
When connecting to such decoder or a decoder-equipped
amplifier, the audio output setting of must be changed
appropriately in the DVD setup (see "Audio Output Setting",
page 45).
¢ Dolby Pro Logic sound can only be obtained when playing back
software with their respective logos.
* Make sure all the supplied speakers are placed and connected
properly (pages 4 and 5).
* Make sure your video equipment and TV are connected properly
(page 4,5 and 6).
* Make sure your video equipment can play back the particular
medium of your Dolby Digital or Dolby Pro Logic software (LDs
or DVDs, for example). Consult the operating instructions for
your equipment.
PLAYING DOLBY SURROUND
SOUND
DOLBY SURROUND
DOLBY SURROUND
=
{0
O0cOC=nS
joovooc0e0oenn
joococconD
WOOOOCORoeo
Playing on the unit (on the disc player)
1 Press DVD/CD and start playback of the disc.
2 Press DOLBY SURROUND.
"NORMAL" is selected, and the playback sound has the
DOLBY SURROUND effect.
Playing with connected video equipment
7 Press VIDEO/AUX and start playback of the video
source.
"VIDEO" is displayed.
2 Press DOLBY SURROUND.
"NORMAL"
is selected, and the playback sound has the
DOLBY SURROUND effect.
To cancel DOLBY SURROUND mode
Press DOLBY SURROUND repeatedly until "OFF" is displayed.
33
DOL
SUR
REC
Advertisement
Table of Contents
