AddSecure NGP Advanced Installation Manual page 43

The Panel sub-menu allows selection of the Serial
connection for specific panel types. Select the drop
down next to Type and you will get a list of panel
types. Select the required panel type and connection
type and then click Save. 'Program success' will be
displayed.
www.addsecure.com
WEB SERVER
The Reports sub-menu allows you to set up a number
of email addresses that could receive emails on the
various options. E.g. Alarms and System messages.
43
The Default sub-menu gives you the option to disable
auto reboot. This is where the device will auto reboot
to try to restore the connection after approximately
two hours of losing that connection to the platform.
Use the drop down arrow next to enabled, change to
disabled and click save. This will stop the device auto
rebooting.
Reboot device allows you to reboot the device
remotely. Click reboot now. You will have to re-
connect to the device as rebooting will lose the
connection. Try reconnecting after a couple of
minutes. To restore the unit to factory settings click
Reset now.
NGP Advanced and NGP Advanced Extra