AddSecure NGP Advanced Installation Manual page 4

Introduction
Product description
NGP Advanced and NGP Advanced Extra are dual path alarm
signalling units for transmitting alarm signals from a customer's alarm
panel, via the AddSecure network, to an Alarm Receiving Centre (ARC)
using pass-through mode of operation. Both NGP Advanced and NGP
Advanced Extra are IP primary path with dual SIM 4G/2G mobile
technology as the backup path. The units are designed for use in both
Security and Fire systems.
The unit communicates via the
Addsecure Network and a valid TA
(Terminal adapter) account must exist
for the unit to communicate. The TA
account will have been populated with
the serial number of the unit. Once
connected to the platform the unit uses
a poll and response check to determine
path status. When the primary path fails
the secondary path will take up the
polling and reporting parameters of the
primary path.
www.addsecure.com
INTRODUCTION
Individual path fails are transmitted
over the remaining path. Dual path
failure is platform generated.
The unit has 16 general purpose alarm
inputs, and 3 outputs, making it suitable
for connection to most common alarm
panels. The unit is supplied already
fitted with two Addsecure enabled SIM
cards, one an EE UK fixed SIM and a UK
roaming SIM. Both enabled for 4G/2G
connectivity.
Figure 1 – NGP Advanced and NGP Advanced Extra unit (not to scale)
4
NGP Advanced and NGP Advanced Extra