AddSecure NGP Advanced Installation Manual page 34

Offline reboot screen
Device will automatically reboot if offline for approx. 2
hours (time will vary between 2 and 3 hours)
This feature can be disabled as follows
Configuration
1
Diagnostics
3
Offline reboot
5
enabled
Offline reboot*
7
disabled
You can exit Edit mode at any time, without saving changes, by
pressing for 5s. This will return you to the sub-menu that you were
making changes in.
Exit configuration menu at any time without saving any changes by
pressing for 5s. This will take you back to the scrolling status display.
www.addsecure.com
Inputs
Press until shows
Web server
disabled
Offline reboot
enabled*
Notice –
Saved!
Press and hold
MAIN MENU DISPLAY
Restore defaults
The Restore defaults option on the menu can be used to set the unit back to
factory default. That is all settings will be reset to their standard values.
Example – setting the unit back to factory default:
Configuration
2 1
Restore Defaults
4 3
The configuration menu can be exited at any time without saving any
6
changes by pressing
status display.
8
34
Press until shows
Press and hold
for 5s. This will take you back to the scrolling
NGP Advanced and NGP Advanced Extra
Inputs
2
Notice –
4
Done!