AddSecure NGP Advanced Installation Manual page 39

Users
This menu allows you to set up additional installers and
end customer app access to the unit and change login PIN
numbers.
To comply with EN 50136-2 Clause 5.2 Access levels, the
PIN code access must be set to 6-digits. You can change the
access PINs in the user settings. This applies for all types of
access to the device.
For best practice, mobile app access requires the Installer
to set up a Web passcode and pin in the device and then
advise and show the end customer how to change the PIN.
For passcode/pin recovery the End Customer needs to
contact their Installer. For PIN resets you can use the reset
pin function in the Ultrasync portal.
www.addsecure.com
WEB SERVER
Settings
The Settings menu has sub-menus to be able to
program the unit. The first screen gives you details
of the device including MAC address and firmware
version. Use the down button to step to the first sub-
menu option or use the drop down to access the sub-
menus.
39
NGP Advanced and NGP Advanced Extra