AddSecure NGP Advanced Installation Manual page 23

Input Sense
The polarity of the pins can manually be configured by the installer.
This is in addition to the Pin Learn function described earlier.
Example – to configure Pin 4 to be positive removed:
Configuration
1
Pin Learn
3
Input Sense 1
5
High
Input Sense 4*
7
High
Notice -
9
Saved!
www.addsecure.com
Inputs
Inputs Sense
Press
Input Sense 4
High
Press until
Input Sense 4*
Low
Press and hold
High (positive applied) or
Low (positive removed).
MAIN MENU DISPLAY
y
y
2
y
y
4
y
6
Edit mode can be exited at any time, without saving
changes, by pressing
sub-menu that you were making changes in.
without saving any changes by pressing
8
will take you back to the scrolling status display.
23
Access the configuration menu by holding Enter button
for 3 seconds, press the Enter button again, the display
will show 'Pin Learn'. Press the down arrow. The display
will show 'Input Sense'. Press the Enter button again to
enter Input Sense. Pin 1 and status will be shown.
Use the down arrow to step through the pins. Once the
desired pin is reached press the Enter button. * will be
displayed. Use down or up arrow to change to High or
Low.
High (positive applied) or Low (positive removed).
Once selected hold the Enter button down till 'Notice –
Saved!' is displayed.
Then it will return to the position in the menu for you to
select another pin or use the down arrow to step through
all pins to get to the Back option.
for 5s. This will return you to the
The configuration menu can be exited at any time
NGP Advanced and NGP Advanced Extra
for 5s. This